Johnson Pump 09-812B-1 Impeller MC97 ( F6B-9) With Glycerine

Buying information Part Number: 09-812B-1 £39.74 inc VAT
Add to Basket

Featured products

Yamaha ABB-FLUSH-JD00 Flushing Kit

Add to basket ABB-FLUSH-JD00 £14.09 inc VAT

Bukh 008E2484 Flange

Add to basket 008E2484 £67.04 inc VAT

Yanmar 129271-91120 Panel Surround

Add to basket 129271-91120 £112.22 inc VAT
Johnson Pump 09-812B-1 Impeller MC97 ( F6B-9) With Glycerine

Product information

 

Johnson Pump 09-812B-1 Impeller MC97 ( F6B-9) With Glycerine

 

How to fit a new impeller:

 
Lubricate the shaft and the inside of the pump body and the end cover. Use Johnson Pump Lubrication to help develop prime and prevent damage from dry-running the pump at initial start-up. Mount the impeller by making a pushing and twisting movement in the rotating direction. Lubricated impellers should not be stored for extended periods of time. The engine should be run after installation of a new impeller to wash out the lubrication. These recommendations apply to any service work on the pump and its components that require the use of lubrication inside the pump for assembly and start-up.
 
Warning! Do not use any petroleum-based products to lubricate the inside of the pump. Only use Johnson Pump Lubrication. Other products can damage the impeller, which will damage the pump and lead to engine failure. Do not run the impeller without water or lubricant; this can cause engine failure or a fire.


1. A vacuum is created as the flexible impeller vanes straighten upon leaving the cam, drawing liquid into the pump.

2. The rotating impeller carries liquid from the inlet to the outlet port.  As a consequence of their design, flexible impeller pumps can pass fairly large solids.

3. When the flexible impeller vanes regain contact with the cam, they bend and the liquid is discharged from the pump in a uniform flow.  Liquids can be pumped in the opposite direction by reversing the rotation of the pump.