Vetus Type MITSTEUN Flexible engine mounts

Buying information Part Number: MITSTEUN £138.00 inc VAT
Add to Basket Enquire

Vetus Type MITSTEUN Flexible engine mounts

Product information

All Vetus engine mouting absorb the propeller thrust. 

The torque of an engine is one of the deciding factors for determinations of the load applied to the engine mounts. When more powerful engines are installed, it is important to use the following formula to define the load per support in kg (4 supporting points).

(engine weight in kg / number of supports) + (kW x 487 x reduction of gearbox / engine rpm  x centre to centre spacing in meters of longitudinal engine bearers) = max. load per support in kg

Type MITSTEUN

This hydro-damper is a combination of a conventional rubber-metal damper and a hydraulic shock absorber. Especially for engines with 1, 2 or 3 cylinders, producing many horizontal and vertical movements, the Vetus hydro-damper is an absolute sensation: the reduction of vibration and noise is truly staggering. The maximum static load per support is 60 kg and the maximum thrust per support is 50 kg. In other word: dependent on gearbox ratio, number of revolutions, propeller diameter etc., these mountings are suitable for engines of up to 18 -26 kW (25 -35 hp)

Type
 
Stiffness ratio Min load kg Min. compression mm Max. Load kg Max. compression mm Hardness in ° Shore
 
Vertical athwartships fore and aft


Static


 Static + Dynamic
K50 1 1 1 25 1.3 67 4.5 45